[Awaiting feedback] Multi only: 365 Finds by found date and 80% Finds by hidden month

Hi I would need a checker for my new challenge GCAP8W9 in the Multies series with the following conditions:
1 AND 2 AND 3 AND (4 OR 5)
1. caches must be multi-caches, i.e. have the multi-cache icon
2. own caches are not allowed.
3. you must fill at least 365 Found-days in the calendar with at least one multi-cache find per day.
4 The second condition is the so-called "Jasmer Callenge". Here you must fill the monthly table (starting with February 2002, which is the placed date of the first - still active multi in Austria) to >= 80%.
That would be 200 out of 250 caches today. The caches found do not have to be in Austria.
5. Alternatively, it is also valid if you have filled 12 consecutive years with multi-cache finds per month.
Hope that is not too complicated.
Thanks Klaus390

Here is the link to a checker https://project-gc.com/Challenges/GCAP8W9/87338

Please test and reply

Hello vogelbird,
thanks for the quick creation and appologies for the delayed reply.
Basically the checker meets what I asked for. However, would it be possible to do a few adoptions?
1. For the 80% condition I would like to start to count at 2002-02 (that would be as of today 214 months instead of 231)
2. Please just leave the digits after the decimal point, only show full numbers if possible
3. in the log sample, please do not show the blocks with max Hidden Date for future years
4. the first line in the log sample, filters section shows:
Filters:( minHiddenDate:2000-05-02 , maxHiddenDate:2024-04-30 , types (Multi-cache) )You have only found caches hidden 118 different months, out of 144 required
which doesn’t fit the pattern. End Date should be 2011-12-31 here and
required would be 136 here (2000 is considered complete with 4 months filled – there exist no multies for the other months).
5. in the Yasmer graphic section, the first overview showing all years would be fine. No need to show the individual possible blocks extra.
thanks a lot Klaus390 from Austria

1. For the 80% condition I would like to start to count at 2002-02 (that would be as of today 214 months instead of 231)
I have adjusted the tag but I can not change the decimal point. This is anchored in the script output.

But for the 12 consecutive years I am stuckeling with your remarks

I have to cater for the future in the tag unless the scriptwriter can make a script extension

Great, first condition is super now.
Also the logic for the 12 years sequence is ok.
It is only about display.
1. the script ouput shows
"You have found caches hidden 252 different month and you needed only 213.6
Filters:( minHiddenDate:2002-02-01 , maxHiddenDate:2024-04-30 , types (Multi-cache) )"
The line in the example log shows errornously:
"Filters:( minHiddenDate:2002-02-01 , maxHiddenDate:2024-04-30 , types (Multi-cache) )You have only found caches hidden 118 different months, out of 144 required"
All other texts are ok.

If it is too much effort to hide future periods and the Year calenders (except for the first showing all) it is fine too.
thanks
Klaus390

Yes you are wright, I did not notice
I will ask bmuzzin to have a look at the script

I think it's correct, minus not having a line break in the right place... the "Filters" should go with the line above it. I'll look at it tonight and see if I can add a newline in the right place to make it slightly clearer.

You have  found caches hidden 252 different month and you needed only 213.6 Filters:( minHiddenDate:2002-02-01 ,  maxHiddenDate:2024-04-30 ,  types (Multi-cache) )
You have only found caches hidden 118 different months, out of 144 required Filters:( minHiddenDate:2001-01-01 ,  maxHiddenDate:2012-12-31 ,  types (Multi-cache) )
...